Finding The Best Bullet Puller For The Money
As a modern-day hunter, you have an abundance of options at your disposal. You can easily buy new bullets each and every time you visit your local store. Unfortunately, this can be very expensive. Alternatively, you may want to consider manually reloading your bullets.
While this might be a little more time consuming, there is truly not doubt that handloading can be fun, unique and cost-effective. Just remember that there are different caliber collets on the market. At the same time, you will need to put in a great deal of effort to ensure you get the best bullet puller for your money.
Within this guide, you will discover in-depth reviews for some of the best products on the market.
#1 Quick-N-EZ Impact Bullet Puller
When refilling cases, there is always room for error. With this said, if you accidentally fill the cases with the wrong powder, you will need to have a bullet puller on-hand. This tool will allow you to separate the bullet from the brass with one strong whack. The Quick-n-EZ Impact Bullet Puller is the key to performing this task in a matter of seconds. The operational process is so easy that you can pull hundreds of bullets in a matter of minutes.
The Quick-n-EZ Bullet Puller is extremely versatile and works will nearly every caliber. The puller will work with the 22-Hornet caliber all the way up to 45-70 calibers. It also works perfectly with both rimmed and rimless bullets. Who knew just one puller could accomplish so much. Well, it can and at a very affordable price. The puller comes with 3 collets, so you can pull bullets from nearly every caliber.
Does Not Damage Casing
The way the Quick-n-EZ Puller works is it grabs ahold of the casing and continues to hold it throughout the process. It separates the bullet from the casing, without damaging the casing. This is something that cannot be said about the competitor brand, which will leave the casing damaged beyond repair.
You will be able to reuse the projectile, powder and brass, so nothing is lost. By doing this, you could potentially save yourself a lot of money, plus all of the components are salvageable. Since, you can reuse everything, you will not need to invest in more bullets.
The great benefit of the Quick-n-EZ Bullet Puller is many of the parts are reusable. If you lose a strainer, you can contact the manufacturer about a replacement. The O-ring is also replacement, which is a good thing, because this component will wear out over time. When the O-ring becomes damaged, you can either contact the manufacturer or visit your local hardware store.
The impact bullet puller is constructed from premium materials that ensure durability and longevity. The puller is designed to withstand a powerful whack over and over again. While it only requires one swift, powerful whack, you will have the option of utilizing the puller an unlimited number of times. If you are looking for reliability and longevity, be sure to keep the Quick-n-EZ Puller in mind, while you are shopping.
- Constructed out of high-grade durable materials
- Separates bullets from casing, without damaging the casing
- The powder, bullet and brass is reusable
- Versatile design
- Comes with 3 collets
- Only requires one swift, powerful whack
The Quick-n-EZ Impact Bullet Puller is the key to separating bullets from brass. The ergonomically designed handle will provide you with a firm grip, so you can whack the hammer end on a solid surface. Blacktop or concrete will be your best bet, because this will offer a more sold foundation. However, you can also utilize a thick piece of hardwood, if you do not have access to a concrete or blacktop surface.
#2 Lyman Magnum Inertia Bullet Puller
As an avid bullet maker, you probably know just how important a bullet puller can be. You could accidentally put the wrong gunpowder inside the wrong casing, or you could pack hundreds of grains of gunpowder into a wrongly cut casing.
All of these situations would result in the loss of gunpowder, without the use of a gun puller. However, do to the extremely popularity and usefulness of gun pullers, there are now tons of different makes and models available on the open market. Of course, this can make choosing the perfect one for your needs difficult. That was until you discovered the Lyman Magnum Inertia Bullet Puller. This is truly one of best bullet pullers available on the market.
Extracts Powder Quickly
With most bullet pullers, you have to whack them against the ground over and over again until the powder is released from the casing. This can be extremely tough on your tool, which will just wear it down over time. However, with the Lyman Magnum Inertia, it only takes a few hits before the gunpowder is released, which will save you tons of wear and tear on your tool.
Ergonomically Designed Handle
Pulling gunpowder out of hundreds of casing might not seem like a lot of work, but it can be extremely tiring. It is almost just like swinging a hammer a thousand times. This is why this bullet puller comes equipped with an ergonomically designed handle. Even after hundreds of swings with this tool you will still be able to keep a firm grip on the handle, so that every swing is landed effectively and efficiently.
The head of this tool is designed so that it can handle a wide variety of ammunition types. The tool can handle anything from a small 5.7 x 28 to a full-sized magnum. This is a feature that can come in extremely handy when you are handling different types of ammunition. The Lyman Magnum Inertia Bullet Puller can handle just about any type of rifle or handgun ammunition that you could see.
Doesn’t Damage Bullet
Another helpful and handy feature is the tools ability to extract gunpowder without damaging the casing. If you want to try to reuse the casing or put it on display this is a feature that can come in extremely helpful.
- Removes powder without damaging the casing
- Handles a wide range of different calibers
- Ergonomically designed handle prevent fatigue
- Extract powder quickly, which reduces wear and tear on tool
If you are looking for an affordable way to extract gunpowder out of casings for whatever reasons, you have to check out the Lyman Magnum Inertia Bullet Puller. This is without a doubt one of the most innovative and amazing gun pullers available on the market today.
#3 Hornady 50090 Kinetic Bullet Puller
Finding a great bullet puller can be much more difficult than you could ever imagine. You’ll need to research carefully and contemplate your own individualistic needs. Or, you can simply check out the Hornady 50090 Kinetic Bullet Puller. This product is genuinely well-rounded enough to satisfy the mass majority of hunters. It is somewhat more expensive than many of the alternatives, but it will prove to be worth the extra cost. What else do you need to know about this bullet puller? You’ll find out below.
When trying to invest in a bullet pullet, you will want to choose one that has no limitations. This is why you should choose the Hornady 50090. This specific product is compatible with almost all bullets. It can be used for pistol and rifle cartridges. At the same time, it can accommodate bullets up to 45-caliber. Truly, it is nearly impossible to find a bullet that this puller cannot handle.
It is also very important to choose a puller that is effective, but gentle. If you want to use the bullet once again, you’ll need to remove it with little to no damage. This is where the Hornady 50090 truly excels. When using this puller, you will be able to effortlessly extract the bullet from the cartridge, without causing excess damage. In the long run, this will save you a great deal of money.
Unique Hollow Head Design
While there is a lot to like about the Hornady 50090 Bullet Puller, it is the product’s hollow head that impresses the most. The hollow head is very beneficial, since it is capable of capturing the bullet, as well as the powder. This guarantees that you’ll be able to reuse the bullet and powder in the future. With this in mind, the bullet puller’s hollow head ensures that this product will pay for itself over a period of time.
Few Hits Needed
With some bullet pullers, you’ll wind up becoming exhausted, before the job is done. This is not a problem with the Hornady 50090. This specific product is designed for maximum ease of use. While it depends on a handful of factors, most bullets can be extract with just a few whacks. This will make your life easier, while ensuring you do not need to break a sweat during the extraction process.
- Generally, puller requires just a few whacks
- Capable of withstanding a lot of pressure and force
- Can pull bullets with tight crimping
- Suitable for pistol and rifle cartridges up to 45-caliber
- Hollow head collects the bullet and powder
Truly, the Hornady 50090 Kinetic Bullet Puller can easily be classified as a bargain. It works exceptionally well and can withstand a great deal of force. This combination makes this one of the best bullet pullers on the market. Be sure to check it out for yourself in greater depth as soon as possible!
#4 RCBS Pow’r Pull Kit
When attempting to find the best bullet puller on the market, you will need to consider an array of factors. You should contemplate the price, ease of use and reliability of the product in question. When taking a look at the RCBS Pow’r Pull Kit, you will quickly discover that this is a very well-rounded bullet puller that will prove to be well worth the investment. RCBS has proven itself to be one of the most efficient companies, when it comes to bullet pullers. This Pow’r Pull Kit is truly no exception. What sets this product apart from its rivals? Continue reading to find out!
Totally Comfortable To Use
Before choosing a bullet puller, you should research carefully and choose one that will be comfortable to use. If you choose one that is uncomfortable, it’ll become an annoyance quickly and you’ll wind up throwing it in the trash. This is where the Pow’r Pull Kit excels. This product is designed with an ergonomic handle. The handle will perfectly fit the contours of your hand, so it’ll remain comfortable from the beginning to the end.
Made In America
When looking for an outstanding bullet puller, it is often wise to carefully research the manufacturer in question. Where are the company’s products manufactured? Is the company in question reliable and highly regarded among consumers? This is another great thing about the RCBS Pow’r Pull Kit. RCBS is one of the most respected companies in the industry. At the same time, the company’s tools are manufactured in the United States. This should provide you with maximum reassurance that the product will prove to be effective and reliable for many years to come.
Only Takes A Few Whacks
Unfortunately, a lot of bullet pullers are slightly ineffective. With many of these products, you will find yourself striking the product against the ground numerous times to no avail. This will not be a problem with the RCBS Pow’r Pull Kit. With this specific product, you will only need to strike the product several times. In fact, this puller works exceptionally well even with bullets that are tightly crimped. If you want a bullet puller that is easy to use and totally effective, you will definitely want to check out the RCBS Pow’r Pull Kit!
Easy To Use
While you’re at it, you should realize that this puller is totally user friendly. In fact, you’ll only need to follow a few simple steps to get it working properly. Simply slip the cartridge into the designated slot. Then, make sure the collet is tightened securely. Once you’re finished, you should slam the product on the ground a few times. This will effectively separate the bullet from the casing.
- Made in the United States
- Only takes a few whacks
- Couldn’t be easier to use
- Includes three different collars of varying sizes
- Works for pistol and rifle ammo
All in all, the RCBS Pow’r Pull Kit is nearly perfect. It is lightweight and totally comfortable to use. Plus, it will give you the ability to get the job done, without causing damage to your bullet. If you want a great American-made bullet puller, this one is well worth checking out!
At the end of the day, the best bullet puller will make a good gift for any avid hunter. This product will make your life substantially easier, while giving you the ability to manually reload your cartridges easier than ever before. Just remember that there are numerous variables to take into consideration. You will need to consider the material use to make the puller and its compatibilities. Once you know what you need, you should refer to the reviews provided above. Do so and you can rest assured knowing you’ve made a good decision.